UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2909
                        
                            Issued:1978-04-18
                    
                            Revised:2012-05-04
                    
                            Style
                            2909
                        
                            Laminated Flat Cable.
                    
			Rating60 or 80 deg C, 30 Vac, Horizontal Flame.
		
			Conductor40 AWG - 12 AWG, Flat or Round Conductors, Material Not Specified. Straight or irregular parallel in one plane.  Flat conductors 1.5-6.0 mils thick, 10-100 mils wide.

			InsulationNon-Extruded(Laminated) Polyester or Non-Extruded(Laminated) PVC, 7 mils minimum average, 5 mils minimum at any point.
		
			AssemblyTwo to 100 uninsulated wires laid parallel in one plane, laminated between a laminated polyester/PVC sheet and an extruded PVC sheet. May include mixed AWG sizes. Minimum 30 mils between conductors and 30 mils minimum edge width.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2909	Issued:1978-04-18
			Revised:2012-05-04


Rating	60 or 80 deg C, 30 Vac, Horizontal Flame.

Conductor	40 AWG - 12 AWG, Flat or Round Conductors, Material Not Specified. Straight or irregular parallel in one plane. Flat conductors 1.5-6.0 mils thick, 10-100 mils wide.

Insulation	Non-Extruded(Laminated) Polyester or Non-Extruded(Laminated) PVC, 7 mils minimum average, 5 mils minimum at any point.

Assembly	Two to 100 uninsulated wires laid parallel in one plane, laminated between a laminated polyester/PVC sheet and an extruded PVC sheet. May include mixed AWG sizes. Minimum 30 mils between conductors and 30 mils minimum edge width.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment.