UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2913
                        
                            Issued:1978-03-08
                    
                            Revised:2011-10-28
                    
                            Style
                            2913
                        
                            Bonded or laminated flat ribbon cable.
                    
			Rating105 deg C, 30 Vac, Horizontal flame.
		
			ConductorNo. 40 AWG min, material not specified.
		
			InsulationPETP with PVC or Polyester Adhesive or Polyimide film with Polyester Adhesive, 1 mils min at any point.
		
			AssemblyTwo or three twisted or parallel.
		
			ShieldOptional.
		
			CoveringFEP, ETFE or PFA min wall at any point 4 mil or Polyethylene Terephthalate with PVC or Polyester Adhesive  min wall at any point 2 mils.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Class 2 Circuits in Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2913	Issued:1978-03-08
			Revised:2011-10-28


Rating	105 deg C, 30 Vac, Horizontal flame.

Conductor	No. 40 AWG min, material not specified.

Insulation	PETP with PVC or Polyester Adhesive or Polyimide film with Polyester Adhesive, 1 mils min at any point.

Assembly	Two or three twisted or parallel.

Shield	Optional.

Covering	FEP, ETFE or PFA min wall at any point 4 mil or Polyethylene Terephthalate with PVC or Polyester Adhesive min wall at any point 2 mils.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Class 2 Circuits in Electronic Equipment.