UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2920
                        
                            Issued:1978-04-05
                    
                            Revised:2019-11-07
                    
                            Style
                            2920
                        
                            Multiple Conductor with Extruded Non-integral Jacket.
                    
			Rating60 deg C, 30 Vac, Cable flame.
		
			Conductor40 AWG - 10 AWG solid or stranded round.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more singles or groups of singles twisted together. The singles or groups may be either laid parallel or cabled together to form a flat cable with no more than three rows of single conductors or groups of conductors. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC
		
			dia in inches
		
			0.425 or less30 mils min average24 mils minimum at any point
		
			0.426-0.700 dia45 avg36 min
		
			0.701-1.000 dia60 avg48 min
		
			1.001 -o 1.500 dia80 avg64 min
		
			1.501-2.500 dia110 avg88 min
		
			2.501 dia and larger140 avg124 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInterconnecting cable for use with EDP equipment where terminated in connectors and located entirely exterior to the equipment, Class 2 wiring systems only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2920	Issued:1978-04-05
			Revised:2019-11-07


Rating	60 deg C, 30 Vac, Cable flame.

Conductor	40 AWG - 10 AWG solid or stranded round.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more singles or groups of singles twisted together. The singles or groups may be either laid parallel or cabled together to form a flat cable with no more than three rows of single conductors or groups of conductors. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Jacket	Extruded PVC
	dia in inches
	0.425 or less	30 mils min average	24 mils minimum at any point
	0.426-0.700 dia	45 avg	36 min
	0.701-1.000 dia	60 avg	48 min
	1.001 -o 1.500 dia	80 avg	64 min
	1.501-2.500 dia	110 avg	88 min
	2.501 dia and larger	140 avg	124 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Interconnecting cable for use with EDP equipment where terminated in connectors and located entirely exterior to the equipment, Class 2 wiring systems only.