UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2921
                        
                            Issued:1978-05-01
                    
                            Revised:2012-04-20
                    
                            Style
                            2921
                        
                            Multiple-conductor using non-integral jacket.
                    
			Rating60 deg C, 30 Vac, Cable flame.
		
			Conductor40 AWG minimum, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.
		
			CoveringOptional. Extruded PVC, a 6 mils or heavier, may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Dia of core assembly under jacket inchesMinimum average thickness milsMinimum thickness at any point mils
		
			0.200 or less2016
		
			0.201-0.4253024
		
			0.426-0.7006048
		
			0.701-1.5008064
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring and external wiring for use in Class 2 circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2921	Issued:1978-05-01
			Revised:2012-04-20


Rating	60 deg C, 30 Vac, Cable flame.

Conductor	40 AWG minimum, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.

Covering	Optional. Extruded PVC, a 6 mils or heavier, may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC.
	Dia of core assembly under jacket inches	Minimum average thickness mils	Minimum thickness at any point mils
	0.200 or less	20	16
	0.201-0.425	30	24
	0.426-0.700	60	48
	0.701-1.500	80	64

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring and external wiring for use in Class 2 circuits only.