UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2931
                        
                            Issued:1978-05-30
                    
                            Revised:2012-04-13
                    
                            Style
                            2931
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating105 deg C, 125 Vac, Horizontal flame.
		
			Insulated Conductor40 AWG minimum. Labeled or complying with Manufacturer's AWM Procedure having a minimum rating of 105°C, 125 V.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.  May use same or mixed AWG size.
		
			CoveringOptional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC
		
			Diameter of Cable Under Jacket in inchesMinimum average thicknessMinimum thickness at any point
		
			0.350 or less20 mils16 mils
		
			0.351-0.70030 mils24 mils
		
			0.701-1.00045 mils36 mils
		
			1.001-1.50060 mils48 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment or external wiring of medical monitoring equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2931	Issued:1978-05-30
			Revised:2012-04-13


Rating	105 deg C, 125 Vac, Horizontal flame.

Insulated Conductor	40 AWG minimum. Labeled or complying with Manufacturer's AWM Procedure having a minimum rating of 105°C, 125 V.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC
	Diameter of Cable Under Jacket in inches	Minimum average thickness	Minimum thickness at any point
	0.350 or less	20 mils	16 mils
	0.351-0.700	30 mils	24 mils
	0.701-1.000	45 mils	36 mils
	1.001-1.500	60 mils	48 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment or external wiring of medical monitoring equipment.