UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2934
                        
                            Issued:1978-06-28
                    
                            Revised:2011-10-26
                    
                            Style
                            2934
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 150 Vac, Cable flame.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size. Fillers required if necessary to form a relatively smooth round core for extrusion of outer jacket.
		
			ShieldOptional.
		
			CoveringOptional. A 6 mil or heavier Extruded PVC covering may be over the conductor assembly.
		
			JacketExtruded PVC;
		
			Dia. of cable under jacket (inches)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0 - 0.7003024
		
			0.701 - 1.0004536
		
			1.001 - 1.5006048
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.

                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2934	Issued:1978-06-28
			Revised:2011-10-26


Rating	80 deg C, 150 Vac, Cable flame.

Insulated Conductor	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size. Fillers required if necessary to form a relatively smooth round core for extrusion of outer jacket.

Shield	Optional.

Covering	Optional. A 6 mil or heavier Extruded PVC covering may be over the conductor assembly.

Jacket	Extruded PVC;
	Dia. of cable under jacket (inches)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0 - 0.700	30	24
	0.701 - 1.000	45	36
	1.001 - 1.500	60	48

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment.