UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2935
                        
                            Issued:1978-06-28
                    
                            Revised:2019-11-07
                    
                            Style
                            2935
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket.
                    
			Rating80 deg C, 300 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			major dia in inches
		
			0.700 or less30 mils min average24 mils minimum at any point
		
			0.70l-l.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			Misc.Fillers - Required if necessary to form a relatively smooth round core for extrusion of outer jacket.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2935	Issued:1978-06-28
			Revised:2019-11-07


Rating	80 deg C, 300 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC
	major dia in inches
	0.700 or less	30 mils min average	24 mils minimum at any point
	0.70l-l.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min

Misc.	Fillers - Required if necessary to form a relatively smooth round core for extrusion of outer jacket.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external wiring.