UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2936
                        
                            Issued:1978-06-28
                    
                            Revised:2019-11-07
                    
                            Style
                            2936
                        
                            Multiple-conductor cabel using non-intergral jacket
                    
			Rating80 deg C, 150 Vac, Horizontal flame.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketPVC
		
			major dia in inches
		
			0.350 or less15 mils min average12 mils minimum at any point
		
			0.351-0.70 dia30 avg24 min
		
			0.70l-l.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.  Tags may indicate the following: "300 volts Peak for Electronic use only".
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2936	Issued:1978-06-28
			Revised:2019-11-07


Rating	80 deg C, 150 Vac, Horizontal flame.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Jacket	PVC
	major dia in inches
	0.350 or less	15 mils min average	12 mils minimum at any point
	0.351-0.70 dia	30 avg	24 min
	0.70l-l.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring. Tags may indicate the following: "300 volts Peak for Electronic use only".