UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2958
                        
                            Issued:1978-09-13
                    
                            Revised:2012-02-03
                    
                            Style
                            2958
                        
                            Laminated flat cable
                    
			Rating105 deg C, 125 Vac, Horizontal flame.
		
			Conductor36 AWG - 16 AWG solid or stranded, round or flat, bare, silver plated, tin plated or nickel plated copper.
		
			InsulationPET, 4 mils min average thickness, 2 mils minimum thickness at any point.
		
			AssemblyTwo to 250 conductors. Oriented PET with a minimum 2 mil adhesive backing. Minimum 20 mil insulation width on the outside edge and between conductors.
		
			Ground PlaneOptional - Expanded copper or copper foil; thickness of one mil minimum at any point. Either one or both of the outer circuit conductors may be in contact with the ground plane. When the ground plane is provided, an additional layer of insulation, described above, is employed.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2958	Issued:1978-09-13
			Revised:2012-02-03


Rating	105 deg C, 125 Vac, Horizontal flame.

Conductor	36 AWG - 16 AWG solid or stranded, round or flat, bare, silver plated, tin plated or nickel plated copper.

Insulation	PET, 4 mils min average thickness, 2 mils minimum thickness at any point.

Assembly	Two to 250 conductors. Oriented PET with a minimum 2 mil adhesive backing. Minimum 20 mil insulation width on the outside edge and between conductors.

Ground Plane	Optional - Expanded copper or copper foil; thickness of one mil minimum at any point. Either one or both of the outer circuit conductors may be in contact with the ground plane. When the ground plane is provided, an additional layer of insulation, described above, is employed.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.