UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2961
                        
                            Issued:1978-09-27
                    
                            Revised:2012-04-13
                    
                            Style
                            2961
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 150 Vac, Cable flame.
		
			Insulated ConductorLabeled or complying with Manufacturer's AWM Procedure having a minimum rating of 80 deg C, 150 Vac.

			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

			CoveringOptional. A 6 mils or heavier PVC covering may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC
		
			Diameter of cable under jacket in inchesMinimum average thicknessMinimum thickness at any point
		
			0.700 or less45 mils36 mils
		
			0.701-1.50060 mils48 mils
		
			1.501-2.50080 mils64 mils
		
			2.501 and larger110 mils88 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2961	Issued:1978-09-27
			Revised:2012-04-13


Rating	80 deg C, 150 Vac, Cable flame.

Insulated Conductor	Labeled or complying with Manufacturer's AWM Procedure having a minimum rating of 80 deg C, 150 Vac.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional. A 6 mils or heavier PVC covering may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC
	Diameter of cable under jacket in inches	Minimum average thickness	Minimum thickness at any point
	0.700 or less	45 mils	36 mils
	0.701-1.500	60 mils	48 mils
	1.501-2.500	80 mils	64 mils
	2.501 and larger	110 mils	88 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment.