UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2971
                        
                            Issued:1978-12-18
                    
                            Revised:2012-04-23
                    
                            Style
                            2971
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			Conductor32 AWG - 20 AWG, solid or stranded.
		
			InsulationExtruded PE, extruded FRPE, extruded XLPE, extruded XLFRPE, extruded foamed PE, extruded foamed FRPE, extruded foamed XLPE or extruded foamed XLFRPE, 5 - 100 mils minimum thickness at any point.
		
			AssemblyTwo to four conductors, insulated singles laid parallel to form flat cable.
		
			ShieldIf conductive PVC shield is used, may form a web between conductors under jacket, and will include a drain wire covered by shield and may appear as edge conductor.
		
			JacketExtruded PVC, 3 - 45 mils minimum thickness at any point, with 0.5 inch maximum interconnecting web.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Electronic Equipment in Class 2 Circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2971	Issued:1978-12-18
			Revised:2012-04-23


Rating	60 deg C, 30 Vac, Horizontal flame.

Conductor	32 AWG - 20 AWG, solid or stranded.

Insulation	Extruded PE, extruded FRPE, extruded XLPE, extruded XLFRPE, extruded foamed PE, extruded foamed FRPE, extruded foamed XLPE or extruded foamed XLFRPE, 5 - 100 mils minimum thickness at any point.

Assembly	Two to four conductors, insulated singles laid parallel to form flat cable.

Shield	If conductive PVC shield is used, may form a web between conductors under jacket, and will include a drain wire covered by shield and may appear as edge conductor.

Jacket	Extruded PVC, 3 - 45 mils minimum thickness at any point, with 0.5 inch maximum interconnecting web.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Electronic Equipment in Class 2 Circuits only.