UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2973
                        
                            Issued:1979-01-11
                    
                            Revised:2012-03-20
                    
                            Style
                            2973
                        
                            Parallel Cable with extruded non-integral jacket.
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG minimum.
		
			InsulationExtruded or foamed FRPE, PE, PVC, XLPE or XLPVC, 5 mils minimum thickness at any point, 125 mils maximum thickness.
		
			AssemblyTwo to four conductors. The insulation may be applied directly over the conductor or applied with a spiral wrapped Polyethylene thread (5 mils min, 40 mils max and enclosed with "tubed on" Polyethylene insulation.
		
			ShieldOptional.
		
			CoveringOptional. Extruded PVC, Polyamide, Polyester, PVPF, ETFE or lacquered braids, 2 mils minimum at any point.
		
			JacketExtruded PVC, 10 mils minimum average thickness, 8 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment, Class 2 wiring systems.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2973	Issued:1979-01-11
			Revised:2012-03-20


Rating	60 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG minimum.

Insulation	Extruded or foamed FRPE, PE, PVC, XLPE or XLPVC, 5 mils minimum thickness at any point, 125 mils maximum thickness.

Assembly	Two to four conductors. The insulation may be applied directly over the conductor or applied with a spiral wrapped Polyethylene thread (5 mils min, 40 mils max and enclosed with "tubed on" Polyethylene insulation.

Shield	Optional.

Covering	Optional. Extruded PVC, Polyamide, Polyester, PVPF, ETFE or lacquered braids, 2 mils minimum at any point.

Jacket	Extruded PVC, 10 mils minimum average thickness, 8 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment, Class 2 wiring systems.