UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2982
                        
                            Issued:1979-02-28
                    
                            Revised:2011-07-28
                    
                            Style
                            2982
                        
                            Multiple-Conductor Cable Using Non-Integral Jacket
                    
			Rating60 deg C, 30 Vac, Cable flame.
		
			ConductorMinimum 40 AWG, solid or stranded round, tinned or bare copper.
		
			InsulationSolid or cellular FRPE or PE or PVC or XLPE or XLPVC, 5 mils minimum thickness at any point, 100 mils maximum thickness at any point.
		
			AssemblyTwo to ten conductors insulated singles laid parallel to form flat cable.
		
			ShieldOptional. Conductive thermoplastic (PVC) Shield, if used, may form a web between conductors under jacket and will include a drain wire covered by thermoplastic shield that may appear as edge conductor.
		
			JacketPVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point. Maximum 1/2 inch web width. May be irradiated.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of Electronic equipment in class 2 circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2982	Issued:1979-02-28
			Revised:2011-07-28


Rating	60 deg C, 30 Vac, Cable flame.

Conductor	Minimum 40 AWG, solid or stranded round, tinned or bare copper.

Insulation	Solid or cellular FRPE or PE or PVC or XLPE or XLPVC, 5 mils minimum thickness at any point, 100 mils maximum thickness at any point.

Assembly	Two to ten conductors insulated singles laid parallel to form flat cable.

Shield	Optional. Conductive thermoplastic (PVC) Shield, if used, may form a web between conductors under jacket and will include a drain wire covered by thermoplastic shield that may appear as edge conductor.

Jacket	PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point. Maximum 1/2 inch web width. May be irradiated.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of Electronic equipment in class 2 circuits only.