UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2983
                        
                            Issued:1979-02-27
                    
                            Revised:2019-11-08
                    
                            Style
                            2983
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating150 deg C, 150 Vac, Horizontal flame, Oil Resistant 80 deg C (optional).
		
			ConductorSolid or stranded round, tinned or bare.
		
			InsulationLabeled or complying with manufacturer's AWM procedure, 5 mils min average. The designations of all styles of individual conductors used in making up the cable assembly shall be available.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-type wrap. Such a barrier would serve to protect the cable during further processing and to be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketFEP
		
			dia in inches
		
			0.425 or less15 mils min average12 mils minimum at any point
		
			0.426-0.700 dia20 avg18 min
		
			0.701-1.500 dia30 avg24 min
		
			1.501-2.500 dia45 avg36 min
		
			2.501 dia and larger60 avg48 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances or electronic equipment. In addition, the tag may also indicate the following: Suitable for 300 volts peak - For Electronic Use Only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2983	Issued:1979-02-27
			Revised:2019-11-08


Rating	150 deg C, 150 Vac, Horizontal flame, Oil Resistant 80 deg C (optional).

Conductor	Solid or stranded round, tinned or bare.

Insulation	Labeled or complying with manufacturer's AWM procedure, 5 mils min average. The designations of all styles of individual conductors used in making up the cable assembly shall be available.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-type wrap. Such a barrier would serve to protect the cable during further processing and to be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	FEP
	dia in inches
	0.425 or less	15 mils min average	12 mils minimum at any point
	0.426-0.700 dia	20 avg	18 min
	0.701-1.500 dia	30 avg	24 min
	1.501-2.500 dia	45 avg	36 min
	2.501 dia and larger	60 avg	48 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances or electronic equipment. In addition, the tag may also indicate the following: Suitable for 300 volts peak - For Electronic Use Only.