UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2984
                        
                            Issued:1979-03-01
                    
                            Revised:2012-05-02
                    
                            Style
                            2984
                        
                            Flat Cable.
                    
			Rating75 deg C, 90 Vac, Horizontal flame.
		
			Conductor32 AWG - 20 AWG copper.
		
			InsulationPE, 6 mils min at any point; Insulation width on outside edges, 6 mils. min.  Minimum spacing Between conductors, 5 mils or multiconductor flat cable labeled or complying with the manufacturers procedure.
		
			AssemblyTwo or more conductors or flat cable complying with Section 2 of the Manufacturer's AWM Procedure . Maximum 0.375 inch thickness over jacket. Maximum 3.5 inch width on outside of jacket.
		
			ShieldOptional. expanded metallic ground planes, one or both sides. The ground plane may be flat copper or aluminum and may be employed as a solid or mesh constructions.
		
			JacketPVC, 30 mils min average, 24 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2984	Issued:1979-03-01
			Revised:2012-05-02


Rating	75 deg C, 90 Vac, Horizontal flame.

Conductor	32 AWG - 20 AWG copper.

Insulation	PE, 6 mils min at any point; Insulation width on outside edges, 6 mils. min. Minimum spacing Between conductors, 5 mils or multiconductor flat cable labeled or complying with the manufacturers procedure.

Assembly	Two or more conductors or flat cable complying with Section 2 of the Manufacturer's AWM Procedure . Maximum 0.375 inch thickness over jacket. Maximum 3.5 inch width on outside of jacket.

Shield	Optional. expanded metallic ground planes, one or both sides. The ground plane may be flat copper or aluminum and may be employed as a solid or mesh constructions.

Jacket	PVC, 30 mils min average, 24 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of electronic equipment.