UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2990
                        
                            Issued:1979-04-11
                    
                            Revised:2013-02-27
                    
                            Style
                            2990
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 30 Vac, Cable flame.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM procedure. 40 AWG minimum.
		
			AssemblyTwo or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional.
		
			CoveringOptional. Extruded PVC, 6 mils minimum thickness at any point, over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Diameter of cable under jacket*Minimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			* - Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral. "Low voltage computer cable" may be printed on jacket surface.
		
			UseInternal Wiring or External Interconnection of Electronic Equipment, class 2 circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2990	Issued:1979-04-11
			Revised:2013-02-27


Rating	80 deg C, 30 Vac, Cable flame.

Insulated Conductor	Labeled or complying with manufacturer's AWM procedure. 40 AWG minimum.

Assembly	Two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional.

Covering	Optional. Extruded PVC, 6 mils minimum thickness at any point, over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC.
	Diameter of cable under jacket*	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	* - Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General. "Low voltage computer cable" may be printed on jacket surface.

Use	Internal Wiring or External Interconnection of Electronic Equipment, class 2 circuits only.