UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2992
                        
                            Issued:1979-04-11
                    
                            Revised:2019-11-07
                    
                            Style
                            2992
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating105 deg C, 30 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional, a 6 mils or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC.
		
			major dia in inches
		
			0.425 or less30 mils minimum average thickness24 mils minimum thickness at any point
		
			0.426-0.700 dia45 avg36 min
		
			0.701-1.500 dia60 avg48 min
		
			1.001-1.500 dia80 avg64 min
		
			1.501-2.500 dia110 avg88 min
		
			2.501 dia and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection, Class 2 circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2992	Issued:1979-04-11
			Revised:2019-11-07


Rating	105 deg C, 30 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional, a 6 mils or heavier PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC.
	major dia in inches
	0.425 or less	30 mils minimum average thickness	24 mils minimum thickness at any point
	0.426-0.700 dia	45 avg	36 min
	0.701-1.500 dia	60 avg	48 min
	1.001-1.500 dia	80 avg	64 min
	1.501-2.500 dia	110 avg	88 min
	2.501 dia and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection, Class 2 circuits only.