UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2994
                        
                            Issued:1979-04-11
                    
                            Revised:2013-01-17
                    
                            Style
                            2994
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			Insulated Conductor40 AWG minimum. Labeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional, extruded PVC, 6 mils minimum thickness at any point, over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Diameter under jacketMinimum average thicknessMinimum thickness at any point
		
			0.250 inch or less15 mils12 mils
		
			0.251-0.425 inch30 mils24 mils
		
			0.426-0.700 inch45 mils36 mils
		
			0.701-1.000 inch60 mils48 mils
		
			1.001-1.500 inch80 mils64 mils
		
			1.501-2.500 inch110 mils88 mils
		
			2.501 inch and larger140 mils112 mils
		
			- Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring with Class 2 Circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2994	Issued:1979-04-11
			Revised:2013-01-17


Rating	60 deg C, 30 Vac, Horizontal flame.

Insulated Conductor	40 AWG minimum. Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional, extruded PVC, 6 mils minimum thickness at any point, over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC.
	Diameter under jacket	Minimum average thickness	Minimum thickness at any point
	0.250 inch or less	15 mils	12 mils
	0.251-0.425 inch	30 mils	24 mils
	0.426-0.700 inch	45 mils	36 mils
	0.701-1.000 inch	60 mils	48 mils
	1.001-1.500 inch	80 mils	64 mils
	1.501-2.500 inch	110 mils	88 mils
	2.501 inch and larger	140 mils	112 mils
	- Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring with Class 2 Circuits only.