UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            3
                        
                            Page
                            30034
                        
                            Issued:2017-02-10
                    
                            Revised:New
                    
                            Style
                            30034
                        
                            High voltage DC wire with extruded insulation and extruded jacket.
                    
			Rating105 deg C, 30000 Vdc, Horizontal flame.
		
			Conductor24-10 AWG copper or nickel, or 12-10 AWG aluminum, or 27-20 AWG Resistance Wire; solid or stranded. Or 24-10 AWG solid or stranded coated high strength copper - min 90% conductivity. Aluminum conductors shall be permitted for a 90 deg C maximum operating temperature. Copper conductors may be tinned, silver or nickel plated, heat bonded or overcoated.
		
			InsulationExtruded XLPE, 20 mils minimum average thickness, 18 mils minimum thickness at any point.
		
			ShieldRequired. Bare or coated copper wire braid, or serving.
		
			CoveringOptional.
		
			JacketExtruded XLPVC, 15 mils minimum average thickness, 12 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	105 deg C, 30000 Vdc, Horizontal flame.

Conductor	24-10 AWG copper or nickel, or 12-10 AWG aluminum, or 27-20 AWG Resistance Wire; solid or stranded. Or 24-10 AWG solid or stranded coated high strength copper - min 90% conductivity. Aluminum conductors shall be permitted for a 90 deg C maximum operating temperature. Copper conductors may be tinned, silver or nickel plated, heat bonded or overcoated.

Insulation	Extruded XLPE, 20 mils minimum average thickness, 18 mils minimum thickness at any point.

Shield	Required. Bare or coated copper wire braid, or serving.

Covering	Optional.

Jacket	Extruded XLPVC, 15 mils minimum average thickness, 12 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.