UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            3
                        
                            Page
                            3007
                        
                            Issued:1959-05-01
                    
                            Revised:2012-07-13
                    
                            Style
                            3007
                        
                            Single Conductor with Extruded Insulation with a Non-extruded Non-integral Covering.
                    
			Rating75 deg C, 600 Vac, FT2 flame.
		
			Conductor26 AWG - 16 AWG, solid or stranded copper, tinning, separators and splices same as required for Type RFH-2 per UL 66.
		
			InsulationExtruded CP, extruded CPE, extruded EP, extruded EPCV, extruded SBR/NR, extruded Silicone or extruded XLPE, nominal 1/32 inch (not a requirement), 45 mils min average, 40 mils minimum at any point.
		
			CoveringBraid.  A wrap may be used in lieu of a braid and shall comply with the requirements in UL 44. Covering may also be dry or saturated.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 3	Page 3007	Issued:1959-05-01
			Revised:2012-07-13


Rating	75 deg C, 600 Vac, FT2 flame.

Conductor	26 AWG - 16 AWG, solid or stranded copper, tinning, separators and splices same as required for Type RFH-2 per UL 66.

Insulation	Extruded CP, extruded CPE, extruded EP, extruded EPCV, extruded SBR/NR, extruded Silicone or extruded XLPE, nominal 1/32 inch (not a requirement), 45 mils min average, 40 mils minimum at any point.

Covering	Braid. A wrap may be used in lieu of a braid and shall comply with the requirements in UL 44. Covering may also be dry or saturated.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.