UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            3
                        
                            Page
                            30094
                        
                            Issued:2021-06-07
                    
                            Revised:New
                    
                            Style
                            30094
                        
                            Single Conductor with Extruded Insulation
                    
			Rating90 deg C, 1000 Vac.
		
			Conductor36 AWG - 250 kcmil, Litz cable magnet wire. A magnet wire conductor shall consist of a single strand Recognized Component - Magnet Wire (OBMW2) or an assembly of these individually enameled wires, which may be assembled or twisted together with an overall covering of film fiber, tape, or extruded compound to form a Litz wire. The minimum rating shall be 90 deg C. AWG size to be determined by the DC Resistance Test.
		
			InsulationExtruded XLPE, 9 mils minimum average thickness, 8 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral. If the Magnet Wire is employed, the words, "Magnet Wire Conductor" shall be marked and the size of the magnet wire conductor shall be identified by its maximum DC resistance at a particular temperature (Example: Maximum____________ohm/feet at ______________C)
		
			UseFor Further Processing into Cables.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	90 deg C, 1000 Vac.

Conductor	36 AWG - 250 kcmil, Litz cable magnet wire. A magnet wire conductor shall consist of a single strand Recognized Component - Magnet Wire (OBMW2) or an assembly of these individually enameled wires, which may be assembled or twisted together with an overall covering of film fiber, tape, or extruded compound to form a Litz wire. The minimum rating shall be 90 deg C. AWG size to be determined by the DC Resistance Test.

Insulation	Extruded XLPE, 9 mils minimum average thickness, 8 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General. If the Magnet Wire is employed, the words, "Magnet Wire Conductor" shall be marked and the size of the magnet wire conductor shall be identified by its maximum DC resistance at a particular temperature (Example: Maximum____________ohm/feet at ______________C)

Use	For Further Processing into Cables.