UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            3
                        
                            Page
                            30097
                        
                            Issued:2021-07-13
                    
                            Revised:New
                    
                            Style
                            30097
                        
                            Single Conductor with Extruded Insulation
                    
			Rating150 deg C, 750 Vac, Horizontal flame.
		
			Conductor30 AWG - 750 kcmil, solid or stranded. Recognized Component - Magnet Wire (OBMW2), rated 200 degrees C (ANSI Type MW35) may be used.
		
			InsulationExtruded XLPE or XLPO.
		
			Conductor sizeMinimum average thicknessMinimum thickness at any point
		
			30-9 AWG30 mils27 mils
		
			8 AWG45 mils41 mils
		
			7-2 AWG60 mils54 mils
		
			1-4/0 AWG80 mils72 mils
		
			250-500 kcmil95 mils86 mils
		
			501-750 kcmil110 mils99 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral. Tags may indicate the following: 2500 V peak - For Electronic Use Only. Wires employing magnet wire shall be plainly marked on the tag: 1) "Magnet Wire Conductors Employed Special Care is required when terminating." 2) "Employs ANSI Type MW35 magnet wire rated 200 deg C."
		
			UseFor use as Motor Leads or Internal Wiring of Appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	150 deg C, 750 Vac, Horizontal flame.

Conductor	30 AWG - 750 kcmil, solid or stranded. Recognized Component - Magnet Wire (OBMW2), rated 200 degrees C (ANSI Type MW35) may be used.

Insulation	Extruded XLPE or XLPO.
	Conductor size	Minimum average thickness	Minimum thickness at any point
	30-9 AWG	30 mils	27 mils
	8 AWG	45 mils	41 mils
	7-2 AWG	60 mils	54 mils
	1-4/0 AWG	80 mils	72 mils
	250-500 kcmil	95 mils	86 mils
	501-750 kcmil	110 mils	99 mils

Standard	Appliance Wiring Material UL 758.

Marking	General. Tags may indicate the following: 2500 V peak - For Electronic Use Only. Wires employing magnet wire shall be plainly marked on the tag: 1) "Magnet Wire Conductors Employed Special Care is required when terminating." 2) "Employs ANSI Type MW35 magnet wire rated 200 deg C."

Use	For use as Motor Leads or Internal Wiring of Appliances.