UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            3
                        
                            Page
                            3051
                        
                            Issued:1959-05-01
                    
                            Revised:2012-05-03
                    
                            Style
                            3051
                        
                            Single conductor with extruded insulation.
                    
			Rating60 deg C, 600 Vac, Horizontal flame.
		
			Conductor18 AWG, 16 AWG solid or stranded, tinned or bare copper.
		
			InsulationExtruded SRB/NR, 45 mils minimum average thickness, 40 mils minimum thickness at any point.
		
			AssemblySame as required for Type RF-2 Fixture Wire.
		
			CoveringBraid. A wrap may be used in lieu of a braid and shall comply with the requirements outlined in the Standard for Flexible Cord and Fixture Wire. Covering may also be saturated.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 3	Page 3051	Issued:1959-05-01
			Revised:2012-05-03


Rating	60 deg C, 600 Vac, Horizontal flame.

Conductor	18 AWG, 16 AWG solid or stranded, tinned or bare copper.

Insulation	Extruded SRB/NR, 45 mils minimum average thickness, 40 mils minimum thickness at any point.

Assembly	Same as required for Type RF-2 Fixture Wire.

Covering	Braid. A wrap may be used in lieu of a braid and shall comply with the requirements outlined in the Standard for Flexible Cord and Fixture Wire. Covering may also be saturated.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.