UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            3
                        
                            Page
                            3145
                        
                            Issued:1960-12-19
                    
                            Revised:2012-04-13
                    
                            Style
                            3145
                        
                            Single conductor with extruded insulation.
                    
			Rating200 deg C, 600 Vac, Horizontal flame.
		
			Conductor12 AWG, solid or stranded nickel or copper. All copper shall be tin, nickel or silver coated. If tinned copper strands are used they shall be 26 AWG or larger.
		
			InsulationExtruded Silicone Rubber, nominal 1/16 inch (not a requirement), 60 mils minimum average thickness, 54 mils minimum thickness at any point.
		
			CoveringSame as for Type SF-2 Fixture Wire.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring, Wiring of Electric Clothes Dryers or Internal Wiring of Appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 3	Page 3145	Issued:1960-12-19
			Revised:2012-04-13


Rating	200 deg C, 600 Vac, Horizontal flame.

Conductor	12 AWG, solid or stranded nickel or copper. All copper shall be tin, nickel or silver coated. If tinned copper strands are used they shall be 26 AWG or larger.

Insulation	Extruded Silicone Rubber, nominal 1/16 inch (not a requirement), 60 mils minimum average thickness, 54 mils minimum thickness at any point.

Covering	Same as for Type SF-2 Fixture Wire.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring, Wiring of Electric Clothes Dryers or Internal Wiring of Appliances.