UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            3
                        
                            Page
                            3170
                        
                            Issued:1961-11-29
                    
                            Revised:2012-04-23
                    
                            Style
                            3170
                        
                            Single conductor with extruded insulation.
                    
			Rating90 deg C, 600 Vac, Horizontal flame.
		
			Conductor26 AWG - 9 AWG solid or stranded round.
		
			InsulationExtruded NEOPRENE, 60 mils minimum average thickness, 54 mils minimum thickness at any point.
		
			ShieldOptional.
		
			CoveringA wrap may be used in lieu of a braid and shall comply with the requirements outlined in the Standard for Flexible Cord and Fixture Wire. Covering may also be dry or saturated.
		
			BraidFiberous
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances where exposed to temperatures not exceeding 90 deg C and where exposed to oil at a temperature not exceeding 60 deg C.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 3	Page 3170	Issued:1961-11-29
			Revised:2012-04-23


Rating	90 deg C, 600 Vac, Horizontal flame.

Conductor	26 AWG - 9 AWG solid or stranded round.

Insulation	Extruded NEOPRENE, 60 mils minimum average thickness, 54 mils minimum thickness at any point.

Shield	Optional.

Covering	A wrap may be used in lieu of a braid and shall comply with the requirements outlined in the Standard for Flexible Cord and Fixture Wire. Covering may also be dry or saturated.

Braid	Fiberous

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances where exposed to temperatures not exceeding 90 deg C and where exposed to oil at a temperature not exceeding 60 deg C.