UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            3
                        
                            Page
                            3249
                        
                            Issued:1971-05-26
                    
                            Revised:2012-12-10
                    
                            Style
                            3249
                        
                            Single-conductor cable using non-integral jacket
                    
			Rating105 deg C, 300 Vac, Horizontal flame.
		
			Conductor30 AWG - 16 AWG solid or stranded.
		
			InsulationExtruded XLPE, 23 mils minimum average thickness, 20 mils minimum thickness at any point.
		
			CoveringOptional, Rayon braid Between Insulation and Shield.
		
			ShieldTinned or untinned copper strands applied as a wrap or a braid or an aluminum faced polyester tape with an uninsulated drain wire.
		
			JacketExtruded PVC, 17 mils minimum average thickness, 15 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 3	Page 3249	Issued:1971-05-26
			Revised:2012-12-10


Rating	105 deg C, 300 Vac, Horizontal flame.

Conductor	30 AWG - 16 AWG solid or stranded.

Insulation	Extruded XLPE, 23 mils minimum average thickness, 20 mils minimum thickness at any point.

Covering	Optional, Rayon braid Between Insulation and Shield.

Shield	Tinned or untinned copper strands applied as a wrap or a braid or an aluminum faced polyester tape with an uninsulated drain wire.

Jacket	Extruded PVC, 17 mils minimum average thickness, 15 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.