UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            3
                        
                            Page
                            3308
                        
                            Issued:1976-09-13
                    
                            Revised:2011-10-28
                    
                            Style
                            3308
                        
                            Single conductor with extruded insulation
                    
			Rating125 deg C, 150 dec C no flexing, 600 Vac, Horizontal flame.
		
			Conductor26 AWG - 4/0 AWG solid or stranded round, tinned or bare copper.
		
			InsulationETHYLENE/ACRYLIC ELASTOMER
		
			26-9 AWG conductor size45 mils min average40 mils minimum at any point
		
			8-2 AWG60 avg54 min
		
			1-4/0 AWG80 avg72 min
		
			See facing page for compound designation.
		
			CoveringOptional. Glass Braid.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances where exposed to temperatures not exceeding 125 deg C. Where no flexing occurs, either after installation or during servicing, temperature not to exceed 150 deg C.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 3	Page 3308	Issued:1976-09-13
			Revised:2011-10-28


Rating	125 deg C, 150 dec C no flexing, 600 Vac, Horizontal flame.

Conductor	26 AWG - 4/0 AWG solid or stranded round, tinned or bare copper.

Insulation	ETHYLENE/ACRYLIC ELASTOMER
	26-9 AWG conductor size	45 mils min average	40 mils minimum at any point
	8-2 AWG	60 avg	54 min
	1-4/0 AWG	80 avg	72 min
	See facing page for compound designation.

Covering	Optional. Glass Braid.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances where exposed to temperatures not exceeding 125 deg C. Where no flexing occurs, either after installation or during servicing, temperature not to exceed 150 deg C.