UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            3
                        
                            Page
                            3334
                        
                            Issued:1978-01-03
                    
                            Revised:2012-07-16
                    
                            Style
                            3334
                        
                            Single conductor with extruded or other than extruded insulation.
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG minimum, material not specified.
		
			InsulationXLPE or XLFRPE solid or cellular, 5 mils min at any point, 125 mils maximum. The insulation may be applied directly over the conductor or applied as a spiral wrapped XLPE or XLFRPE thread (5 mils min., 40 mils max) and enclosed with "tubed on" insulation.
		
			AssemblyInsulated conductor with optional inner covering, optional shield, and covering.
		
			ShieldOptional.
		
			CoveringInner covering (Optional) - Extruded PVC, Polyamide, Polyester, PVDF, ETFE or lacquered braids, 2 mils min. at any point. Outer covering - the same as the inner covering, required over any shield except braided metal.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 3	Page 3334	Issued:1978-01-03
			Revised:2012-07-16


Rating	60 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG minimum, material not specified.

Insulation	XLPE or XLFRPE solid or cellular, 5 mils min at any point, 125 mils maximum. The insulation may be applied directly over the conductor or applied as a spiral wrapped XLPE or XLFRPE thread (5 mils min., 40 mils max) and enclosed with "tubed on" insulation.

Assembly	Insulated conductor with optional inner covering, optional shield, and covering.

Shield	Optional.

Covering	Inner covering (Optional) - Extruded PVC, Polyamide, Polyester, PVDF, ETFE or lacquered braids, 2 mils min. at any point. Outer covering - the same as the inner covering, required over any shield except braided metal.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.