UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            3
                        
                            Page
                            3340
                        
                            Issued:1978-04-05
                    
                            Revised:2013-04-02
                    
                            Style
                            3340
                        
                            Single conductor with extruded insulation
                    
			Rating125 deg C, 600 Vac, 750 Vdc. No flexing - 150 deg C, 600 Vac or 750 Vdc. Horizontal flame.
		
			Conductor26 AWG - 500 kcmil, solid or stranded.
		
			InsulationExtruded EPDM.
		
			Conductor sizeMinimum average thicknessMinimum thickness at any point
		
			26-9 AWG45 mils41 mils
		
			8-2 AWG60 mils54 mils
		
			1-4/0 AWG80 mils72 mils
		
			250-500 kcmil95 mils86 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseMotor Leads and Internal Wiring of Appliances where exposed to temperatures not exceeding 125 deg C. Where no flexing occurs either after installation of during servicing, temperatures not to exceed 150 deg C.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 3	Page 3340	Issued:1978-04-05
			Revised:2013-04-02


Rating	125 deg C, 600 Vac, 750 Vdc. No flexing - 150 deg C, 600 Vac or 750 Vdc. Horizontal flame.

Conductor	26 AWG - 500 kcmil, solid or stranded.

Insulation	Extruded EPDM.
	Conductor size	Minimum average thickness	Minimum thickness at any point
	26-9 AWG	45 mils	41 mils
	8-2 AWG	60 mils	54 mils
	1-4/0 AWG	80 mils	72 mils
	250-500 kcmil	95 mils	86 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Motor Leads and Internal Wiring of Appliances where exposed to temperatures not exceeding 125 deg C. Where no flexing occurs either after installation of during servicing, temperatures not to exceed 150 deg C.