UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            3
                        
                            Page
                            3414
                        
                            Issued:1981-01-19
                    
                            Revised:2012-01-10
                    
                            Style
                            3414
                        
                            Single-conductor cable using non-integral jacket
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor30 AWG - 20 AWG solid or stranded copper, copper-clad steel, or copper alloy, bare, tin or silver coated.
		
			InsulationComposite thickness 17 mils min average, 16 mils minimum at any point. Inner layer of Foamed XLPE with min. 3 mils thick outer layer of solid XLHDPE. The two layers, both inner and outer, are extruded simultaneously and can not be separated.
		
			ShieldOptional.
		
			JacketExtruded PVC, 27 mils min average thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Electronic Equipment, where not subjected to mechanical abouse or compression.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 3	Page 3414	Issued:1981-01-19
			Revised:2012-01-10


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	30 AWG - 20 AWG solid or stranded copper, copper-clad steel, or copper alloy, bare, tin or silver coated.

Insulation	Composite thickness 17 mils min average, 16 mils minimum at any point. Inner layer of Foamed XLPE with min. 3 mils thick outer layer of solid XLHDPE. The two layers, both inner and outer, are extruded simultaneously and can not be separated.

Shield	Optional.

Jacket	Extruded PVC, 27 mils min average thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Electronic Equipment, where not subjected to mechanical abouse or compression.