UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            3
                        
                            Page
                            3452
                        
                            Issued:1982-04-14
                    
                            Revised:2012-07-12
                    
                            Style
                            3452
                        
                            Single Conductor with Extruded Insulation
                    
			Rating125 deg C, 30 Vac, VW-1 Flame.
		
			Conductor40 AWG min. material not specified.
		
			InsulationExtruded Solid or Foamed XLPE, 4 mils min. at any point, 100 mils maximum.
		
			AssemblyInsulated conductor is built with inner covering, outer conductor, middle covering,  and outer covering.
		
			Inner CoveringOptional - 2 mils minimum at any point Extruded XLPE or Non-Extruded Lacquered Braid.
		
			Outer ConductorOptional - Non-Ferrous Metallic Braid or Wrap. A wrap of Conductoraluminum faced Mylar tape with an uninsulated drain wire(s) may be used when the optional outer covering is used.
		
			Middle CoveringOptional - 2 mils minimum at any point Extruded XLPE or Non-Extruded Lacquered Braid.
		
			ShieldOptional.
		
			Outer CoveringOptional - XLPE 12.5 mils min. at any point, 40 mils max.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Low Energy Non-Hazardous Circuits in Audio and Video Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 3	Page 3452	Issued:1982-04-14
			Revised:2012-07-12


Rating	125 deg C, 30 Vac, VW-1 Flame.

Conductor	40 AWG min. material not specified.

Insulation	Extruded Solid or Foamed XLPE, 4 mils min. at any point, 100 mils maximum.

Assembly	Insulated conductor is built with inner covering, outer conductor, middle covering, and outer covering.

Inner Covering	Optional - 2 mils minimum at any point Extruded XLPE or Non-Extruded Lacquered Braid.

Outer Conductor	Optional - Non-Ferrous Metallic Braid or Wrap. A wrap of Conductoraluminum faced Mylar tape with an uninsulated drain wire(s) may be used when the optional outer covering is used.

Middle Covering	Optional - 2 mils minimum at any point Extruded XLPE or Non-Extruded Lacquered Braid.

Shield	Optional.

Outer Covering	Optional - XLPE 12.5 mils min. at any point, 40 mils max.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Low Energy Non-Hazardous Circuits in Audio and Video Equipment.