UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            3
                        
                            Page
                            3483
                        
                            Issued:1984-04-20
                    
                            Revised:2012-05-08
                    
                            Style
                            3483
                        
                            Single Conductor with Extruded Insulation and Extruded or Non-Extruded Jacket
                    
			Rating90 deg C, 30 Vac, Horizontal Flame.
		
			Conductor40 AWG min, material not specified.
		
			InsulationExtruded ETFE or Extruded FRPE or Extruded XLPE or Extruded PVC, Solid or Foamed, 3.0 mils minimum at any point, 100 mils max.
		
			ShieldOptional.
		
			CoveringOptional - Non-Extruded Polyester or Polyamide Tape, 0.2 mil minimum at any point applied with 50 percent overlap and heat sealed.
		
			JacketExtruded ETFE or Extruded FEP or Extruded PFA or Extruded PVC, minimum wall at any point 4 mils; or spirally wrapped Non-Extruded PVC, Non-Extruded ETFE, Non-Extruded FEP or Non-Extruded PFA Tape applied with 50 percent overlap as a first layer and spirally wrapped 0.2 mil Non-Extruded Polyester or Polyamide Tape applied with 50 percent overlap and heat sealed as a second layer. Minimum wall at any point 2 mils.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Class 2 Circuits in Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 3	Page 3483	Issued:1984-04-20
			Revised:2012-05-08


Rating	90 deg C, 30 Vac, Horizontal Flame.

Conductor	40 AWG min, material not specified.

Insulation	Extruded ETFE or Extruded FRPE or Extruded XLPE or Extruded PVC, Solid or Foamed, 3.0 mils minimum at any point, 100 mils max.

Shield	Optional.

Covering	Optional - Non-Extruded Polyester or Polyamide Tape, 0.2 mil minimum at any point applied with 50 percent overlap and heat sealed.

Jacket	Extruded ETFE or Extruded FEP or Extruded PFA or Extruded PVC, minimum wall at any point 4 mils; or spirally wrapped Non-Extruded PVC, Non-Extruded ETFE, Non-Extruded FEP or Non-Extruded PFA Tape applied with 50 percent overlap as a first layer and spirally wrapped 0.2 mil Non-Extruded Polyester or Polyamide Tape applied with 50 percent overlap and heat sealed as a second layer. Minimum wall at any point 2 mils.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Class 2 Circuits in Electronic Equipment.