UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            3
                        
                            Page
                            3562
                        
                            Issued:1992-08-26
                    
                            Revised:2012-04-23
                    
                            Style
                            3562
                        
                            Single conductor with extruded insulation an non-integral jacket.
                    
			Rating150 deg C, 600 Vac, Horizontal flame.
		
			Conductor32 AWG - 4/0 AWG solid or stranded, or solid or stranded coated high strength copper-min 90 percent conductivity.
		
			InsulationExtruded XLPE
		
			32-10 AWG conductor size15 mils minimum average thickness13 mils minimum thicknes at any point
		
			8-6 AWG30 avg27 min
		
			4-2 AWG40 avg36 min
		
			1-4/0 AWG50 avg45 min
		
			See facing page for compound designation.
		
			JacketExtruded ECTFE or Extruded ETFE or Extruded FEP or ExtrudedPVDF
		
			32-10 AWG conductor size2 mils minimum thickness at any point
		
			8-6 AWG3 min
		
			4-2 AWG4 min
		
			1-4/0 AWG5 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use as Motor Leads or Internal Wiring of Appliances. Tags may indicate the following: 2500 V Peak - For Electronics Use Only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 3	Page 3562	Issued:1992-08-26
			Revised:2012-04-23


Rating	150 deg C, 600 Vac, Horizontal flame.

Conductor	32 AWG - 4/0 AWG solid or stranded, or solid or stranded coated high strength copper-min 90 percent conductivity.

Insulation	Extruded XLPE
	32-10 AWG conductor size	15 mils minimum average thickness	13 mils minimum thicknes at any point
	8-6 AWG	30 avg	27 min
	4-2 AWG	40 avg	36 min
	1-4/0 AWG	50 avg	45 min
	See facing page for compound designation.

Jacket	Extruded ECTFE or Extruded ETFE or Extruded FEP or ExtrudedPVDF
	32-10 AWG conductor size	2 mils minimum thickness at any point
	8-6 AWG	3 min
	4-2 AWG	4 min
	1-4/0 AWG	5 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use as Motor Leads or Internal Wiring of Appliances. Tags may indicate the following: 2500 V Peak - For Electronics Use Only.