UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            3
                        
                            Page
                            3590
                        
                            Issued:1996-02-08
                    
                            Revised:2009-09-25
                    
                            Style
                            3590
                        
                            Single conductor with extruded insulation.
                    
			Rating200 deg C, 300 Vac, Horizontal flame.
		
			ConductorMinimum 0.0015 in dia resistance copper-Nickel or Nickel Chromium alloy wire spirally wound over a fiberglass core 0.051 in (1.3 mm) maximum thickness.
		
			InsulationSR - Silicone Rubber, 15 mils minimum average, 13 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring for use in Heaters, Crankcase and Defrost Refrigeration where not subjected to repeated flexing where the acceptability of the combination has been determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 3	Page 3590	Issued:1996-02-08
			Revised:2009-09-25


Rating	200 deg C, 300 Vac, Horizontal flame.

Conductor	Minimum 0.0015 in dia resistance copper-Nickel or Nickel Chromium alloy wire spirally wound over a fiberglass core 0.051 in (1.3 mm) maximum thickness.

Insulation	SR - Silicone Rubber, 15 mils minimum average, 13 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring for use in Heaters, Crankcase and Defrost Refrigeration where not subjected to repeated flexing where the acceptability of the combination has been determined by Underwriters Laboratories Inc.