UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            3
                        
                            Page
                            3628
                        
                            Issued:1999-08-11
                    
                            Revised:2013-01-07
                    
                            Style
                            3628
                        
                            Single insulated conductor with non-integral jacket
                    
			Rating90 deg C, 600 Vac, 60 deg C Wet
		
			Conductor50 AWG - 10 AWG nickel, copper alloy or copper, size varies dependent upon wattage demand.
		
			InsulationExtruded solid XLPE, 30 mils minimum average thickness, 27 mils minimum thickness at any point.
		
			ShieldBare copper braid. Combination of strand size and number of strands such that braid is equivalent to 18 AWG.
		
			CoveringExtruded Nylon, 3 mils minimum thickness.
		
			JacketExtruded PVC, 20 mils minimum average thickness, 16 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseResistance Wire for Heating Cable Units where not evaluated for flame and where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 3	Page 3628	Issued:1999-08-11
			Revised:2013-01-07


Rating	90 deg C, 600 Vac, 60 deg C Wet

Conductor	50 AWG - 10 AWG nickel, copper alloy or copper, size varies dependent upon wattage demand.

Insulation	Extruded solid XLPE, 30 mils minimum average thickness, 27 mils minimum thickness at any point.

Shield	Bare copper braid. Combination of strand size and number of strands such that braid is equivalent to 18 AWG.

Covering	Extruded Nylon, 3 mils minimum thickness.

Jacket	Extruded PVC, 20 mils minimum average thickness, 16 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Resistance Wire for Heating Cable Units where not evaluated for flame and where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.