UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            3
                        
                            Page
                            3702
                        
                            Issued:2004-02-02
                    
                            Revised:2011-10-11
                    
                            Style
                            3702
                        
                            Single conductor with extruded insulation
                    
			Rating150 deg C, 600 Vac, Horizontal flame.
		
			ConductorMinimum 0.0015 in dia, Copper-Nickel or Nickel Chromium alloy resistance wire spirally wound over a fiberglass core 0.051 in (1.3 mm) maximum thickness.
		
			InsulationExtruded SR, 30 mils minimum average thickness, 27 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring for use in Heaters, Crankcase and Defrost Refrigeration where not subjected to repeated flexing where the acceptability of the combination has been determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 3	Page 3702	Issued:2004-02-02
			Revised:2011-10-11


Rating	150 deg C, 600 Vac, Horizontal flame.

Conductor	Minimum 0.0015 in dia, Copper-Nickel or Nickel Chromium alloy resistance wire spirally wound over a fiberglass core 0.051 in (1.3 mm) maximum thickness.

Insulation	Extruded SR, 30 mils minimum average thickness, 27 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring for use in Heaters, Crankcase and Defrost Refrigeration where not subjected to repeated flexing where the acceptability of the combination has been determined by Underwriters Laboratories Inc.