UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            3
                        
                            Page
                            3710
                        
                            Issued:2004-04-19
                    
                            Revised:2011-07-28
                    
                            Style
                            3710
                        
                            Single insulated conductor using non-integral jacket
                    
			Rating90 deg C, 300 Vac, Horizontal flame.
		
			ConductorStranded wire, 50-12 AWG, and / or Synthetic Yarns impregnated with conductive materials, metal or carbon coated; strength member.
		
			BufferOptional- Extruded PVC, 3 mils minimum average thickness.
		
			InsulationExtruded XLPE, 7 mils minimum average thickness and 6 mils minimum thickness at any point or Extrued PVC 9 mils minimum average thickness and 7 mils minimum thickness at any point.
		
			ShieldOptional. Drain wire optional.
		
			JacketExtruded PVC, 17 mils minimum average thickness, 14 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring, Resistance Heater Wire
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 3	Page 3710	Issued:2004-04-19
			Revised:2011-07-28


Rating	90 deg C, 300 Vac, Horizontal flame.

Conductor	Stranded wire, 50-12 AWG, and / or Synthetic Yarns impregnated with conductive materials, metal or carbon coated; strength member.

Buffer	Optional- Extruded PVC, 3 mils minimum average thickness.

Insulation	Extruded XLPE, 7 mils minimum average thickness and 6 mils minimum thickness at any point or Extrued PVC 9 mils minimum average thickness and 7 mils minimum thickness at any point.

Shield	Optional. Drain wire optional.

Jacket	Extruded PVC, 17 mils minimum average thickness, 14 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring, Resistance Heater Wire