UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            3
                        
                            Page
                            3836
                        
                            Issued:2009-01-28
                    
                            Revised:2011-08-03
                    
                            Style
                            3836
                        
                            Single conductor with extruded insulation using non-extruded outer covering.
                    
			Rating105 deg C, 30 V ac, Horizontal flame.
		
			Conductor46 AWG - 10 AWG min. solid or stranded round.
		
			InsulationExtruded XLPE, 4 mils min average, 3 mils min at any point.
		
			Inner CoveringOptional - Non-extrued polyester film may be provied over the insulation.
		
			ShieldRequired.
		
			Outer CoveringRequired.  Non-extruded polyester film provided over the shield, 0.2 mils minimum thickness, spirally wrapped with 25% minimum overlap and heat bonded, minmum bonded width 20 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring where not subject to mechanical abuse or movement.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 3	Page 3836	Issued:2009-01-28
			Revised:2011-08-03


Rating	105 deg C, 30 V ac, Horizontal flame.

Conductor	46 AWG - 10 AWG min. solid or stranded round.

Insulation	Extruded XLPE, 4 mils min average, 3 mils min at any point.

Inner Covering	Optional - Non-extrued polyester film may be provied over the insulation.

Shield	Required.

Outer Covering	Required. Non-extruded polyester film provided over the shield, 0.2 mils minimum thickness, spirally wrapped with 25% minimum overlap and heat bonded, minmum bonded width 20 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring where not subject to mechanical abuse or movement.