UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4002
                        
                            Issued:1959-05-01
                    
                            Revised:2012-07-18
                    
                            Style
                            4002
                        
                            Four-Conductor Type SV Cord.
                    
			Rating60 deg C, 300 Vac, FT2 flame.
		
			Conductor20 AWG consisting of No. 34 or 36 AWG stranded.
		
			InsulationExtruded CP, CPE, EP, NBR/PVC, NR - NEOPRENE, SRB/NR, XL, 15 mils min average, 14 mils minimum at any point. Cotton Braid shall be provided over the individual insulated conductors. Conductors shall be twisted with a maximum lay of 2 inches.
		
			AssemblyFour conductor, same as type SV. Cotton Braid shall be provided over the individual insulated conductors. Conductors shall be twisted with a maximum lay of 2 inches.
		
			JacketExtruded CP, EPDM, NBR/PVC, NR - NEOPRENE, SRB/NR, 30 mils min average, 24 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use only on Television Receivers.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4002	Issued:1959-05-01
			Revised:2012-07-18


Rating	60 deg C, 300 Vac, FT2 flame.

Conductor	20 AWG consisting of No. 34 or 36 AWG stranded.

Insulation	Extruded CP, CPE, EP, NBR/PVC, NR - NEOPRENE, SRB/NR, XL, 15 mils min average, 14 mils minimum at any point. Cotton Braid shall be provided over the individual insulated conductors. Conductors shall be twisted with a maximum lay of 2 inches.

Assembly	Four conductor, same as type SV. Cotton Braid shall be provided over the individual insulated conductors. Conductors shall be twisted with a maximum lay of 2 inches.

Jacket	Extruded CP, EPDM, NBR/PVC, NR - NEOPRENE, SRB/NR, 30 mils min average, 24 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use only on Television Receivers.