UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4020
                        
                            Issued:1959-05-01
                    
                            Revised:2012-03-29
                    
                            Style
                            4020
                        
                            Parallel cable with extruded integral insulation.
                    
			Rating90 deg C, 300 Vac, FT2 flame, 60 deg C Oil.
		
			Conductor20 AWG - 16 AWG consisting of No. 30 AWG or smaller copper strands.
		
			Integral Insulation and JacketExtruded Neoprene, 45 mils minimum average thickness, 40 mils minimum thickness at any point before separation, 27 mils minimum thickness at any point after separation.
		
			AssemblyThree conductor, same as type SP-2 excep for use on Neoprene insulation material.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use only in Internal Wiring of Lighting Circuits in Refrigerating Equipment where exposed to temperatures not exceeding 90 C and where exposed to oil at a temperature 
			not exceeding 60 C.  Polarity identification may be 		
			omitted.

                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4020	Issued:1959-05-01
			Revised:2012-03-29


Rating	90 deg C, 300 Vac, FT2 flame, 60 deg C Oil.

Conductor	20 AWG - 16 AWG consisting of No. 30 AWG or smaller copper strands.

Integral Insulation and Jacket	Extruded Neoprene, 45 mils minimum average thickness, 40 mils minimum thickness at any point before separation, 27 mils minimum thickness at any point after separation.

Assembly	Three conductor, same as type SP-2 excep for use on Neoprene insulation material.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use only in Internal Wiring of Lighting Circuits in Refrigerating Equipment where exposed to temperatures not exceeding 90 C and where exposed to oil at a temperature not exceeding 60 C. Polarity identification may be omitted.