UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4028
                        
                            Issued:1959-05-01
                    
                            Revised:2012-04-23
                    
                            Style
                            4028
                        
                            Parallel Cable with Extruded Integral Insulation and Jacket.
                    
			Rating90 deg C, 300 Vac, FT2 flame, Oil Resistant 60 deg C.
		
			Conductor18 AWG - 16 AWG consisting of No. 30 AWG or smaller stranded, tinned or bare copper.
		
			InsulationIntegral with Jacket. NR - NEOPRENE, 60 mils min average, 54 mils minimum at any point. See Facing Page
		
			AssemblyThree conductor, same as type SP-3.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use only in Internal Wiring of Electric Refrigerators or Gas or Oil-Fired Domestic Heating Equipment where exposed to temperatures not exceeding 90 deg C and where exposed to oil at a temperature not exceeding 60 deg C. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4028	Issued:1959-05-01
			Revised:2012-04-23


Rating	90 deg C, 300 Vac, FT2 flame, Oil Resistant 60 deg C.

Conductor	18 AWG - 16 AWG consisting of No. 30 AWG or smaller stranded, tinned or bare copper.

Insulation	Integral with Jacket. NR - NEOPRENE, 60 mils min average, 54 mils minimum at any point. See Facing Page

Assembly	Three conductor, same as type SP-3.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use only in Internal Wiring of Electric Refrigerators or Gas or Oil-Fired Domestic Heating Equipment where exposed to temperatures not exceeding 90 deg C and where exposed to oil at a temperature not exceeding 60 deg C. Polarity identification may be omitted.