UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4032
                        
                            Issued:1959-05-01
                    
                            Revised:2012-07-18
                    
                            Style
                            4032
                        
                            Parallel cable with jacket.
                    
			Rating90 deg C, 600 Vac, FT2 flame, Oil Resistant 60 deg C (optional).
		
			Conductor18 AWG - 16 AWG consisting of No. 30 AWG or smaller stranded.
		
			IntegralExtruded NR - NEOPRENE, 60 mils min average, 54 mils minimum at any point.
		
			AssemblyTwo conductor, Same as for Type SP Cord except with a nominal 60 mils wall or See Facing Page, and the following (Pin Gauge) dimensions: Wall thickness: 0.058 in, Web thickness: 0.078 in, Wall after rip: 0.028 in.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Electric Refrigerators or other equipment where ripped not more than 3 in unless installed in a separate metal enclosure; or for use only in the wiring of butter conditioners where exposed at the door hinge. Additional Ratings: A) Where exposed to oil at a temperature not exceeding 60 deg C. B) "125 deg C in air". See Facing Page for Compound.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4032	Issued:1959-05-01
			Revised:2012-07-18


Rating	90 deg C, 600 Vac, FT2 flame, Oil Resistant 60 deg C (optional).

Conductor	18 AWG - 16 AWG consisting of No. 30 AWG or smaller stranded.

Integral	Extruded NR - NEOPRENE, 60 mils min average, 54 mils minimum at any point.

Assembly	Two conductor, Same as for Type SP Cord except with a nominal 60 mils wall or See Facing Page, and the following (Pin Gauge) dimensions: Wall thickness: 0.058 in, Web thickness: 0.078 in, Wall after rip: 0.028 in.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Electric Refrigerators or other equipment where ripped not more than 3 in unless installed in a separate metal enclosure; or for use only in the wiring of butter conditioners where exposed at the door hinge. Additional Ratings: A) Where exposed to oil at a temperature not exceeding 60 deg C. B) "125 deg C in air". See Facing Page for Compound.