UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4039
                        
                            Issued:1959-05-01
                    
                            Revised:2012-02-10
                    
                            Style
                            4039
                        
                            Parallel Cable with Extruded Integral Insulation.
                    
			Rating75 deg C, 300 Vac, Horizontal flame, 60 deg C Oil.
		
			Conductor14 AWG - 10 AWG, consisting of 30 AWG or smaller strands.
		
			InsulationExtruded Neoprene, 80 mils minimum average thickness, 70 mils minimum thickness at any point before rip, 43 mils minimum thickness at any point after rip, 109mils minimum web thickness.
		
			AssemblyTwo conductor, similar to Type SP.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Room Cooler Units where ripped not more than three inches unless installed in a separate metal enclosure and where exposed to oil at a temperature not exceeding 60 deg C. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4039	Issued:1959-05-01
			Revised:2012-02-10


Rating	75 deg C, 300 Vac, Horizontal flame, 60 deg C Oil.

Conductor	14 AWG - 10 AWG, consisting of 30 AWG or smaller strands.

Insulation	Extruded Neoprene, 80 mils minimum average thickness, 70 mils minimum thickness at any point before rip, 43 mils minimum thickness at any point after rip, 109mils minimum web thickness.

Assembly	Two conductor, similar to Type SP.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Room Cooler Units where ripped not more than three inches unless installed in a separate metal enclosure and where exposed to oil at a temperature not exceeding 60 deg C. Polarity identification may be omitted.