UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4040
                        
                            Issued:1959-05-01
                    
                            Revised:2011-12-23
                    
                            Style
                            4040
                        
                            Parallel cable with extrueded integral insulation
                    
			Rating90 deg C, 300 Vac, Horizontal flame, Oil Resistant 60 deg C (optional).
		
			ConductorTwo No. 14, 12, 10 AWG consisting of No. 30 AWG or smaller copper strands.
		
			InsulationIntegral with Jacket. NR - NEOPRENE, 80 mils wall Class 17 neoprene or see Facing Page and the following (pin gauge) dimensions: Wall thickness: 0.078 in., Web thickness: 0.109 in., Wall after rip: 0.043 in.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Room Cooler Units where ripped not more than 3 in unless installed in a separate metal enclosure. Additional ratings: a) Where exposed to oil at a temperature not exceeding 60 deg C. b) "125 deg C in air", see Facing Page for Compound.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4040	Issued:1959-05-01
			Revised:2011-12-23


Rating	90 deg C, 300 Vac, Horizontal flame, Oil Resistant 60 deg C (optional).

Conductor	Two No. 14, 12, 10 AWG consisting of No. 30 AWG or smaller copper strands.

Insulation	Integral with Jacket. NR - NEOPRENE, 80 mils wall Class 17 neoprene or see Facing Page and the following (pin gauge) dimensions: Wall thickness: 0.078 in., Web thickness: 0.109 in., Wall after rip: 0.043 in.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Room Cooler Units where ripped not more than 3 in unless installed in a separate metal enclosure. Additional ratings: a) Where exposed to oil at a temperature not exceeding 60 deg C. b) "125 deg C in air", see Facing Page for Compound.