UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4047
                        
                            Issued:1959-05-01
                    
                            Revised:2011-10-19
                    
                            Style
                            4047
                        
                            Parallel cable with extruded insulation.
                    
			Rating75 deg C, 600 Vac, Horizontal flame, Oil Resistant 60 deg C.
		
			Conductor14 AWG - 10 AWG, consisting of No. 30 AWG or smaller, solid or stranded.
		
			InsulationIntegral with Jacket. Extruded neoprene, 80 mils min average, 72 mils minimum at any point.
		
			AssemblyTwo conductors, same as type SP with a nominal 80 mils wall the following (pin gauge) dimensions: Wall thickness: 0.070 in., Web thickness: 0.141 in., Wall after rip: 0.058 in.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use only in Internal Wiring of Room Coolers and where exposed to temperatures not exceeding 75 deg C and where exposed to oil at a temperature not exceeding 60 deg C. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4047	Issued:1959-05-01
			Revised:2011-10-19


Rating	75 deg C, 600 Vac, Horizontal flame, Oil Resistant 60 deg C.

Conductor	14 AWG - 10 AWG, consisting of No. 30 AWG or smaller, solid or stranded.

Insulation	Integral with Jacket. Extruded neoprene, 80 mils min average, 72 mils minimum at any point.

Assembly	Two conductors, same as type SP with a nominal 80 mils wall the following (pin gauge) dimensions: Wall thickness: 0.070 in., Web thickness: 0.141 in., Wall after rip: 0.058 in.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use only in Internal Wiring of Room Coolers and where exposed to temperatures not exceeding 75 deg C and where exposed to oil at a temperature not exceeding 60 deg C. Polarity identification may be omitted.