UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4069
                        
                            Issued:1959-05-01
                    
                            Revised:2012-01-30
                    
                            Style
                            4069
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 600 Vac, Horizontal flame.
		
			Conductor18 AWG - 2 AWG stranded, tinned or bare copper.
		
			InsulationNR or IR, SBR, EP or a blend there of; CR, CSM, CPE or NBR/PVC, Nominal 45 mils min average, 40 mils minimum at any point. Otherwise same as required for Type S Cord.
		
			AssemblySame as type S Cord except fillers may be omitted.
		
			JacketCR, CSM, EP, NBR/PVC or CPE. Nominal 30 mils min average, 24 mils minimum at any point, otherwise same as required for Type S Cord.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Room Cooler Units.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4069	Issued:1959-05-01
			Revised:2012-01-30


Rating	60 deg C, 600 Vac, Horizontal flame.

Conductor	18 AWG - 2 AWG stranded, tinned or bare copper.

Insulation	NR or IR, SBR, EP or a blend there of; CR, CSM, CPE or NBR/PVC, Nominal 45 mils min average, 40 mils minimum at any point. Otherwise same as required for Type S Cord.

Assembly	Same as type S Cord except fillers may be omitted.

Jacket	CR, CSM, EP, NBR/PVC or CPE. Nominal 30 mils min average, 24 mils minimum at any point, otherwise same as required for Type S Cord.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Room Cooler Units.