UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4070
                        
                            Issued:1959-05-01
                    
                            Revised:2012-04-12
                    
                            Style
                            4070
                        
                            S Cord
                    
			Rating60 deg C, 600 Vac, Horizontal flame.
		
			Conductor9 AWG - 1 AWG stranded tinned or bare copper consisting of No. 23 AWG or smaller copper strands.
		
			InsulationExtruded CP or CPE or EP or NBR/PVC or NR - NEOPRENE or SRB/NR or XL, 80 mils min average, 72 mils minimum at any point.
		
			AssemblySame as type S Cord except fillers may be omitted.
		
			JacketExtruded CP or EPDM or NBR/PVC or NR - NEOPRENE or SRB/NR, 45 mils min average, 36 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Room Cooler Units.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4070	Issued:1959-05-01
			Revised:2012-04-12


Rating	60 deg C, 600 Vac, Horizontal flame.

Conductor	9 AWG - 1 AWG stranded tinned or bare copper consisting of No. 23 AWG or smaller copper strands.

Insulation	Extruded CP or CPE or EP or NBR/PVC or NR - NEOPRENE or SRB/NR or XL, 80 mils min average, 72 mils minimum at any point.

Assembly	Same as type S Cord except fillers may be omitted.

Jacket	Extruded CP or EPDM or NBR/PVC or NR - NEOPRENE or SRB/NR, 45 mils min average, 36 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Room Cooler Units.