UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4079
                        
                            Issued:1959-05-01
                    
                            Revised:2012-07-25
                    
                            Style
                            4079
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			ConductorA and B - 18 AWG, and C, D and E - 20 AWG, each consisting of 30 AWG strands, metal-coated copper.
		
			InsulationSame as for Type SJ Cord. Extruded solid NR, SBR/IR, EP, Neoprene, Thermoset CPE, or NBR/PVC, 30 mils average thickness, 27 mils minimum at any point.
		
			AssemblyFive conductors, same as for Type SJ Cord. Colors: A-Gray, B-Blue, C-Red, D-Black, E-Brown. 
C and D shall be twisted together with a 1 1/4 inches maximum lay. A, B and E, along with the combined conductors C and D with cotton or jute fillers shall be twisted with a 5 1/2 inches maximum lay. A cotton serve shall be applied over the conductor assembly.
		
			JacketSame as for Type SJ Cord. Extruded solid EPDM, Neoprene, Thermoset CPE, or NBR/PVC, 30 mils min average, 24 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInteral Wiring
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4079	Issued:1959-05-01
			Revised:2012-07-25


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	A and B - 18 AWG, and C, D and E - 20 AWG, each consisting of 30 AWG strands, metal-coated copper.

Insulation	Same as for Type SJ Cord. Extruded solid NR, SBR/IR, EP, Neoprene, Thermoset CPE, or NBR/PVC, 30 mils average thickness, 27 mils minimum at any point.

Assembly	Five conductors, same as for Type SJ Cord. Colors: A-Gray, B-Blue, C-Red, D-Black, E-Brown. C and D shall be twisted together with a 1 1/4 inches maximum lay. A, B and E, along with the combined conductors C and D with cotton or jute fillers shall be twisted with a 5 1/2 inches maximum lay. A cotton serve shall be applied over the conductor assembly.

Jacket	Same as for Type SJ Cord. Extruded solid EPDM, Neoprene, Thermoset CPE, or NBR/PVC, 30 mils min average, 24 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Interal Wiring