UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4080
                        
                            Issued:1959-05-01
                    
                            Revised:2012-04-09
                    
                            Style
                            4080
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 300 Vac, FT2 flame.
		
			Conductor20 AWG - 18 AWG consisting of No. 30 AWG smaller stranded.
		
			InsulationExtruded CP or extruded CPE or extruded EP or extruded NBR/PVC or extruded NR - NEOPRENE or extruded SRB/NR or extruded XL, 30 mils min average, 27 mils minimum at any point.
		
			AssemblyFive conductors, same as type SJ Cord Colors - A - Gray, B-Blue, C-Red, D-Black, E-Brown. Conductor E shall be provided with a cotton wrap over the rubber insulation. A tinned- copper braid shield (four No. 34 Awg strands in each of 16 carriers) shall be applied over the wrap and a cotton wrap shall be applied over the shield. A, B, and E and the combined conductors C and D, together with cotton or jute fillers shall be twisted with a 5-1/2 inch maximum lay. A cotton serve shall be applied over the conductor assembly.
		
			JacketExtruded CP or extruded EPDM or extruded NBR/PVC or extruded NR - NEOPRENE or extruded SRB/NR, 30 mils min average, 24 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor Use with Electric Organs.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4080	Issued:1959-05-01
			Revised:2012-04-09


Rating	60 deg C, 300 Vac, FT2 flame.

Conductor	20 AWG - 18 AWG consisting of No. 30 AWG smaller stranded.

Insulation	Extruded CP or extruded CPE or extruded EP or extruded NBR/PVC or extruded NR - NEOPRENE or extruded SRB/NR or extruded XL, 30 mils min average, 27 mils minimum at any point.

Assembly	Five conductors, same as type SJ Cord Colors - A - Gray, B-Blue, C-Red, D-Black, E-Brown. Conductor E shall be provided with a cotton wrap over the rubber insulation. A tinned- copper braid shield (four No. 34 Awg strands in each of 16 carriers) shall be applied over the wrap and a cotton wrap shall be applied over the shield. A, B, and E and the combined conductors C and D, together with cotton or jute fillers shall be twisted with a 5-1/2 inch maximum lay. A cotton serve shall be applied over the conductor assembly.

Jacket	Extruded CP or extruded EPDM or extruded NBR/PVC or extruded NR - NEOPRENE or extruded SRB/NR, 30 mils min average, 24 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For Use with Electric Organs.