UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4081
                        
                            Issued:1959-05-01
                    
                            Revised:2012-05-10
                    
                            Style
                            4081
                        
                            Multiple-conductor cable using non-extruded non-integral covering.
                    
			Rating60 deg C, 300 Vac, Horizontal Flame.
		
			ConductorTwo special tinsel conductors, 23 AWG, an assembly of 42 strands No. 6 tinsel consisting of three groups having a rope lay, each group consisting of 14 strands, and each strand consisting of a flattened, 39 AWG copper wire wound around a 2-ply cotton thread core.  A cotton separator shall be used.
		
			InsulationExtruded SRB/NR, 15 mils minimum average thickness. Cotton braid on individual insulated conductor.
		
			AssemblyConductors shall be twisted with a maximum lay of 1 inch (a 5% tolerance shall be permitted). A cotton filler shall be provided. Binder over assembled conductors shall be optional.
		
			CoveringNon-Extruded Glazed Cotton Braid shall be provided over the assembled conductors.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring for Use Only as the connection between the motor and base of oscillating fans.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4081	Issued:1959-05-01
			Revised:2012-05-10


Rating	60 deg C, 300 Vac, Horizontal Flame.

Conductor	Two special tinsel conductors, 23 AWG, an assembly of 42 strands No. 6 tinsel consisting of three groups having a rope lay, each group consisting of 14 strands, and each strand consisting of a flattened, 39 AWG copper wire wound around a 2-ply cotton thread core. A cotton separator shall be used.

Insulation	Extruded SRB/NR, 15 mils minimum average thickness. Cotton braid on individual insulated conductor.

Assembly	Conductors shall be twisted with a maximum lay of 1 inch (a 5% tolerance shall be permitted). A cotton filler shall be provided. Binder over assembled conductors shall be optional.

Covering	Non-Extruded Glazed Cotton Braid shall be provided over the assembled conductors.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring for Use Only as the connection between the motor and base of oscillating fans.